محصولات

محصولات

The Air-cooled heat exchanger (Air cooler) is a device for rejecting heat from a fluid or gas directly to ambient air. When cooling both fluids and gases, there are two sources readily available, with a relatively low cost, to transfer heat to.....air and water. The noticeable advantage of an air cooler is that it does not require water, which means that it is not needed to locate the equipment near supply of cooling water. In addition, the problems associated with treatment and disposal of water have become more costly with government regulations and environmental concerns

Air Cooled Condenser (ACC) is a system used for cooling of steam in the Thermal Power, Oil, Gas and Petrochemical Plants.

In this system, steam enters in vacuum/half vacuum condition, and is distilled and exits as saturated water. Vacuum pressure is a critical parameter to consider during the design procedure.

ACCs are supplied in three major types:
  • Multi Row Condenser – with circular tubes
  • Multi Row Condenser – with oval tubes, galvanization as the bonding process (MRG)
  • Single Row Condenser – with oval flat tubes, brazing as the bonding process (SRC)
  • Aban Air Cooler as the pioneers of Air Cooled Heat Exchangers in the MENA region, brings ACCs in the Multi Row and the single row condenser systems in this market for the first time.

    The development of the technology is performed by our R&D, Design and Engineering team with collaboration of our local and international consultants.

    Air separation unit produce one or both of the two most common atmospheric industrial gases (nitrogen and oxygen) in the form of gas and sometimes as liquid products. Some plants also produce argon, and occasionally, the "rare gases" (neon, krypton and xenon). The composition of dry air is approximately 78% nitrogen, 21% oxygen, and 1% argon (by volume) plus small amounts of carbon dioxide, neon, helium, krypton, hydrogen, and xenon. Cryogenic plants Produce nitrogen, oxygen and argon as gas (and liquid) products using very low temperature distillation to separate and purify the desired products. Cryogenic plants are most commonly used to produce high purity products at medium to high production rates. Cryogenic air separation processes rely on differences in boiling points to separate and purify products. These air separation process cycles have evolved in parallel with advances in compression machinery, heat exchangers, distillation technology and gas expander technology. This company has the ability of supply of ASU from well-known manufacturers with the highest quality and competitive prices with the help of certified experts and technical information.

    Shell and Tube Heat Exchanger is the most common of the various types of unfired heat transfer equipment. It is the only type which can be considered for large surface areas having pressure greater than 30 bar and temperatures greater than 260.A shell and tube exchanger consists of a number of tubes mounted inside a cylindrical shell. Two fluids can exchange heat, one fluid flows over the outside of the tubes while the second fluid flows through the tubes. The fluids can be single or two phase and can flow in a parallel or a cross/counter flow arrangement

    We provide our cooling solutions for the power plants in two separate methods: Dry Cooling: for direct and indirect cooling system requirements Hybrid Cooling: for reduction of water consumption The Heat exchangers that we design and manufacture include: Heller-Forgo (Delta HEX) – An aluminum fabricated heat exchanger chemically coated to withstand ambient conditions for more than 15 years Air Cooled Condensers – We supply variety of this type of heat exchanger in form of multi-row and single-row condensers

    With our wide experience, we can handle refrigeration package jobs in a range of offerings from compressors, package to complete solutions. Refrigeration Engineering provides flexible supply options to meet varying customer requirements including: Complete skid mounted packages Process design – featuring process simulation, detailed engineering, documentation and drawings along with process guarantee and major component supply, for integration into a larger system by the client. Consulting services – providing expert advice on improving your plant processes, capacity upgrades and more

    TOP